Performer-Plus Camshaft Kit for Small-Block Ford Cleveland 351C V8 (7168)
000853470716854 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Universal
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 13.0 hrs — $1,625 at $125/hr. Pick Install at HRC and a 20% labor deposit ($325) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Edelbrock part #7168 Performer RPM Camshaft is designed for small-block Ford 351C V-8 applications. This Edelbrock cam kit produced 465 HP & 445Ft-lbs. of torque when used with #7564 intake and #61629 cylinder heads on a 351C. engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees - Lift @ Valve Intake: .562" - Lift @ Valve Exhaust: .588" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees
| Part Type | Engine Camshaft and Lifter Kit |
|---|---|
| Lobe Separation | 112° |
| Grade Type | Performance |
| Lifter Materials | Hardened Steel |
| Computer Controlled Compatible | No |
| Exhaust Duration at .050 inch Lift | 244° |
| Cam Type | Cast |
| Exhaust Valve Lift | 0.562" |
| Intake Duration .050 Inch Lift | 234° |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Intake Valve Lift | 0.562" |
| Lifter Type | Hydraulic |
| Weight | 14.3 lb |
| UPC | 00085347071685 |
| Country of Origin | USA |
Verified fitment · 153 applications
- Ford Country Sedan (1969–1974)
- Ford Country Squire (1969–1974)
- Ford Custom (1969–1972)
- Ford Custom 500 (1969–1974)
- Ford Fairlane (1969–1970)
- Ford Falcon (1970)
- Ford Galaxie 500 (1969–1974)
- Ford Gran Torino (1972–1974)
- Ford LTD (1969–1974)
- Ford Mustang (1969–1973)
- Ford Ranch Wagon (1969–1974)
- Ford Ranchero (1969–1974)
- Ford Torino (1970–1974)
- Mercury Colony Park (1970–1974)
- Mercury Comet (1969)
- Mercury Cougar (1970–1974)
- Mercury Cyclone (1969–1971)
- Mercury Marquis (1970–1974)
- Mercury Montego (1969–1974)
- Mercury Monterey (1970–1974)
| Part No. | 7168 |
|---|---|
| Brand | Edelbrock |
| Part Type | Engine Camshaft and Lifter Kit |
| Weight | 14.3 lb |
| UPC | 00085347071685 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
