Complete Sure Seat Valve Spring Kit for Ford 289-302 & 351W V8 (5796)
000853470579624 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Universal — verify fitment for your application
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 6.0 hrs — $750 at $125/hr. Pick Install at HRC and a 20% labor deposit ($150) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Edelbrock part #5796 Sure Seat Valve Spring Kit is designed for Small-Block Ford 351W O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original equipment heads when installing Edelbrock Performer, RPM & Torker Series camshafts. The valve springs are designed for use with OEM valve rotators. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application. Set of 16. Valve Spring Specifications: Type: Non-Rotator Seat Pressure: 89 lbs. Installed Height: 1.770" Open Pressure: 233 lbs. @ 0.390" Outside Diameter: 1.438" Inside Diameter: 1.024" Coil Bind: 1.260"
| Part Type | Engine Valve Spring Kit |
|---|---|
| Spring Type | Standard |
| Coil Bind Height | 1.26" |
| Spring Open Height | 0.390" |
| Open Pressure | 233 |
| Camshaft Type | Flat Tappet |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Inside Diameter | 1.02" |
| Outside Diameter | 1.438" |
| Installed Height | 1.770" |
| Installed Pressure | 89 |
| Weight | 5.25 lb |
| UPC | 00085347057962 |
| Country of Origin | USA |
Verified fitment · 504 applications
- Ford Bronco 5.8L (1978–1996)
- Ford Country Sedan (1969–1974)
- Ford Country Squire (1969–1974)
- Ford Custom (1969–1972)
- Ford Custom 500 (1969–1974)
- Ford Custom 500 5.8L (1975–1977)
- Ford E-100 Econoline 5.8L (1975–1983)
- Ford E-100 Econoline Club Wagon 5.8L (1975–1983)
- Ford E-150 Econoline 5.8L (1975–1996)
- Ford E-150 Econoline Club Wagon 5.8L (1975–1996)
- Ford E-250 Econoline 5.8L (1975–1996)
- Ford E-250 Econoline Club Wagon 5.8L (1975–1991)
- Ford E-350 Econoline 5.8L (1975–1996)
- Ford E-350 Econoline Club Wagon 5.8L (1977–1996)
- Ford Elite 5.8L (1975–1976)
- Ford F-100 5.8L (1977–1979)
- Ford F-150 5.8L (1977–1996)
- Ford F-250 5.8L (1977–1996)
- Ford F-250 HD 5.8L (1997)
- Ford F-350 5.8L (1977–1997)
- Ford Fairlane (1969–1970)
- Ford Falcon (1969–1970)
- Ford Galaxie 500 (1969–1974)
- Ford Gran Torino (1972–1974)
- Ford Gran Torino 5.8L (1975–1976)
- Ford Granada 5.8L (1975–1977)
- Ford LTD (1969–1974)
- Ford LTD 5.8L (1975–1984)
- Ford LTD Crown Victoria 5.8L (1987–1991)
- Ford LTD II 5.8L (1977–1979)
- Ford Mustang (1969–1973)
- Ford Mustang 5.8L (1995)
- Ford Ranch Wagon (1969–1974)
- Ford Ranchero (1969–1974)
- Ford Ranchero 5.8L (1975–1979)
- Ford Thunderbird 5.8L (1977–1979)
- Ford Torino (1969–1974)
- Ford Torino 5.8L (1975–1976)
- Lincoln Continental 5.8L (1980)
- Lincoln Mark VI 5.8L (1980)
- Lincoln Versailles 5.8L (1977)
- Mercury Colony Park (1969–1974)
- Mercury Comet (1969)
- Mercury Cougar (1969–1974)
- Mercury Cougar 5.8L (1975–1979)
- Mercury Cyclone (1969–1971)
- Mercury Grand Marquis 5.8L (1978–1981)
- Mercury Marquis (1971–1973)
- Mercury Marquis 5.8L (1978–1981)
- Mercury Monarch 5.8L (1975–1977)
- Mercury Montego (1969–1974)
- Mercury Montego 5.8L (1975–1976)
- Mercury Monterey (1970–1974)
| Part No. | 5796 |
|---|---|
| Brand | Edelbrock |
| Part Type | Engine Valve Spring Kit |
| Weight | 5.25 lb |
| UPC | 00085347057962 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.