Edelbrock Rollin' Thunder Camshaft for Small-Block Ford 351W V8 (2281)
000853470228164 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Universal
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 11.0 hrs — $1,375 at $125/hr. Pick Install at HRC and a 20% labor deposit ($275) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Edelbrock Rollin' Thunder Camshaft #2281 is designed for 351W Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 449HP and 413 Ft Lbs of Torque when paired with RPM Air-Gap Dual Quad intake manifold #75354 and Performer RPM cylinder heads #60255. Must use a high stall torque converter. Will not work with stock valve springs. Camshaft specifications: - Intake duration: 235 Degrees - Exhaust duration: 238 Degrees - Intake lift: .573" - Exhaust lift: .582" - Lobe separation: 112 Degree - Intake Center Line: 107 - Vacuum: 10"
| Part Type | Engine Camshaft |
|---|---|
| Computer Controlled Compatible | No |
| Lobe Separation | 112° |
| Exhaust Valve Lift | 0.364" |
| Exhaust Duration at .050 inch Lift | 238° |
| Cam Type | Roller |
| Exhaust Valve Lift with Factory Rocker Arm Ratio | 0.582" |
| Lifter Type | Roller |
| Intake Duration at .050 Inch Lift | 238° |
| Intake Valve Lift | 0.364" |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Advertised Intake Duration | 299° |
| Advertised Exhaust Duration | 302° |
| Intake Valve Lift with Factory Rocker Arm Ratio | 0.573" |
| Weight | 10.5 lb |
| UPC | 00085347022816 |
| Country of Origin | USA |
Verified fitment · 509 applications
- Ford Bronco 5.8L (1978–1993)
- Ford Country Sedan (1969–1974)
- Ford Country Squire (1969–1974)
- Ford Custom (1969–1972)
- Ford Custom 500 (1969–1974)
- Ford Custom 500 Base 5.8L (1975–1977)
- Ford E-100 Econoline 5.8L (1975–1983)
- Ford E-100 Econoline Club Wagon 5.8L (1975–1983)
- Ford E-150 Econoline 5.8L (1975–1993)
- Ford E-150 Econoline Club Wagon 5.8L (1975–1993)
- Ford E-250 Econoline 5.8L (1975–1993)
- Ford E-250 Econoline Club Wagon 5.8L (1975–1991)
- Ford E-350 Econoline 5.8L (1975–1993)
- Ford E-350 Econoline Club Wagon 5.8L (1977–1993)
- Ford Elite 5.8L (1975–1976)
- Ford F-100 5.8L (1977–1979)
- Ford F-150 5.8L (1977–1992)
- Ford F-150 Lightning 5.8L (1993)
- Ford F-150 XL 5.8L (1993)
- Ford F-150 XLT 5.8L (1993)
- Ford F-250 5.8L (1977–1993)
- Ford F-350 5.8L (1977–1993)
- Ford Fairlane (1969–1970)
- Ford Falcon (1969–1970)
- Ford Galaxie 500 (1969–1974)
- Ford Gran Torino (1972–1974)
- Ford Gran Torino 5.8L (1975–1976)
- Ford Granada 5.8L (1975–1977)
- Ford LTD (1969–1974)
- Ford LTD 5.8L (1979–1981)
- Ford LTD Base 5.8L (1975–1982)
- Ford LTD Brougham 5.8L (1975–1976)
- Ford LTD Country Squire 5.8L (1983–1984)
- Ford LTD Crown Victoria 5.8L (1982–1984)
- Ford LTD Crown Victoria Base 5.8L (1987–1991)
- Ford LTD II 5.8L (1978–1979)
- Ford LTD II Base 5.8L (1977)
- Ford LTD II Brougham 5.8L (1977)
- Ford LTD II S 5.8L (1977)
- Ford LTD II Squire 5.8L (1977)
- Ford LTD Landau 5.8L (1975–1978)
- Ford LTD S 5.8L (1982)
- Ford Mustang (1973)
- Ford Mustang Base (1969–1972)
- Ford Mustang Grande (1970–1972)
- Ford Mustang Shelby GT-350 (1969–1970)
- Ford Ranch Wagon (1969–1974)
- Ford Ranchero (1969–1974)
- Ford Ranchero 5.8L (1975–1979)
- Ford Thunderbird 5.8L (1977–1979)
- Ford Torino (1972–1974)
- Ford Torino 5.8L (1975–1976)
- Ford Torino 500 (1971)
- Ford Torino Base (1969–1971)
- Ford Torino Brougham (1970–1971)
- Ford Torino Cobra (1971)
- Ford Torino GT (1969–1971)
- Ford Torino Squire (1969–1971)
- Lincoln Continental 5.8L (1980)
- Lincoln Mark VI 5.8L (1980)
- Lincoln Versailles 5.8L (1977)
- Mercury Colony Park (1969–1974)
- Mercury Comet (1969)
- Mercury Cougar (1972–1974)
- Mercury Cougar 5.8L (1975–1979)
- Mercury Cougar Base (1969–1971)
- Mercury Cougar Base 5.8L (1977)
- Mercury Cougar Brougham 5.8L (1977)
- Mercury Cougar Villager 5.8L (1977)
- Mercury Cougar XR-7 (1969–1971)
- Mercury Cougar XR-7 5.8L (1977)
- Mercury Cyclone (1969–1971)
- Mercury Grand Marquis 5.8L (1978–1981)
- Mercury Marquis (1971–1973)
- Mercury Marquis 5.8L (1978–1981)
- Mercury Monarch 5.8L (1975–1977)
- Mercury Montego (1969–1974)
- Mercury Montego 5.8L (1975–1976)
- Mercury Monterey (1970–1974)
| Part No. | 2281 |
|---|---|
| Brand | Edelbrock |
| Part Type | Engine Camshaft |
| Weight | 10.5 lb |
| UPC | 00085347022816 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
