Edelbrock Performer-Plus Camshaft Kit for Pontiac 350-403 V8 (2157)
000853470215744 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Universal
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 13.0 hrs — $1,625 at $125/hr. Pick Install at HRC and a 20% labor deposit ($325) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Edelbrock Performer-Plus Camshaft #2157 is designed for 350-455 Pontiac V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2157 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 387HP and 439 Ft Lbs of Torque when paired with Performer intake manifold #2156 and Performer RPM cylinder heads #60599. Camshaft specifications: - Intake duration: 204 Degrees - Exhaust duration: 214 Degrees - Intake lift: .420" - Exhaust lift: .442" - Lobe separation: 110 Degree - Intake Center Line: 105 Degree - Vacuum: 15"
| Part Type | Engine Camshaft and Lifter Kit |
|---|---|
| Advertised Intake Duration | 278° |
| Cam Type | Cast |
| Lifter Type | Hydraulic |
| Grade Type | Performance |
| Intake Valve Lift | 0.420" |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Advertised Exhaust Duration | 288° |
| Lobe Separation | 110° |
| Lifter Materials | Hardened Steel |
| Exhaust Valve Lift | 0.442" |
| Exhaust Duration at .050 inch Lift | 214° |
| Computer Controlled Compatible | No |
| Intake Duration .050 Inch Lift | 204° |
| Weight | 13.95 lb |
| UPC | 00085347021574 |
| Country of Origin | USA |
Verified fitment · 422 applications
- Buick LeSabre 6.6L (1975)
- GMC G3500 (1984)
- Oldsmobile 98 6.6L (1975)
- Oldsmobile Custom Cruiser 6.6L (1975)
- Oldsmobile Delta 88 6.6L (1975)
- Pontiac Acadian 6.6L (1970–1971)
- Pontiac Bonneville (1972–1974)
- Pontiac Bonneville 6.1L (1958)
- Pontiac Bonneville 6.4L (1959–1966)
- Pontiac Bonneville 6.6L (1967–1978)
- Pontiac Bonneville 6.9L (1963–1966)
- Pontiac Bonneville 7.0L (1967–1969)
- Pontiac Bonneville 7.5L (1970–1974)
- Pontiac Catalina (1972–1976)
- Pontiac Catalina 6.1L (1958)
- Pontiac Catalina 6.4L (1959–1966)
- Pontiac Catalina 6.6L (1967–1978)
- Pontiac Catalina 6.9L (1961–1966)
- Pontiac Catalina 7.0L (1967–1969)
- Pontiac Catalina 7.5L (1970–1974)
- Pontiac Chieftain 6.1L (1958)
- Pontiac Executive 6.6L (1967–1970)
- Pontiac Executive 7.0L (1967–1969)
- Pontiac Executive 7.5L (1970)
- Pontiac Firebird (1972–1976)
- Pontiac Firebird 6.6L (1967–1979)
- Pontiac Firebird 7.5L (1971–1974)
- Pontiac GTO 6.4L (1964–1966)
- Pontiac GTO 6.6L (1967–1973)
- Pontiac GTO 7.5L (1970–1973)
- Pontiac Grand Am (1973–1974)
- Pontiac Grand Am 6.6L (1973–1975)
- Pontiac Grand Am 7.5L (1973–1974)
- Pontiac Grand LeMans (1975–1976)
- Pontiac Grand LeMans 6.6L (1975–1977)
- Pontiac Grand Prix (1972–1976)
- Pontiac Grand Prix 6.4L (1962–1966)
- Pontiac Grand Prix 6.6L (1967–1977)
- Pontiac Grand Prix 6.9L (1963–1966)
- Pontiac Grand Prix 7.0L (1967–1969)
- Pontiac Grand Prix 7.5L (1970–1974)
- Pontiac Grand Safari (1973–1974)
- Pontiac Grand Safari 6.6L (1971–1978)
- Pontiac Grand Safari 7.5L (1971–1975)
- Pontiac Grandville 6.6L (1972–1975)
- Pontiac Grandville 7.5L (1971–1974)
- Pontiac Laurentian (1970–1974)
- Pontiac Laurentian 6.6L (1967–1976)
- Pontiac Laurentian 7.0L (1966–1969)
- Pontiac Laurentian 7.5L (1971–1976)
- Pontiac LeMans (1972–1976)
- Pontiac LeMans 6.6L (1968–1977)
- Pontiac LeMans 7.5L (1970–1974)
- Pontiac Parisienne (1970–1974)
- Pontiac Parisienne 6.6L (1967–1976)
- Pontiac Parisienne 7.0L (1966–1969)
- Pontiac Parisienne 7.5L (1970–1976)
- Pontiac Star Chief 6.1L (1958)
- Pontiac Star Chief 6.4L (1959–1966)
- Pontiac Star Chief 6.9L (1963–1966)
- Pontiac Strato-Chief (1970)
- Pontiac Strato-Chief 6.6L (1970)
- Pontiac Strato-Chief 7.0L (1966–1969)
- Pontiac Super Chief 6.1L (1958)
- Pontiac Tempest 6.6L (1968–1970)
- Pontiac Ventura (1972–1975)
- Pontiac Ventura 6.4L (1960–1961)
- Pontiac Ventura 6.9L (1961)
| Part No. | 2157 |
|---|---|
| Brand | Edelbrock |
| Part Type | Engine Camshaft and Lifter Kit |
| Weight | 13.95 lb |
| UPC | 00085347021574 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
