Edelbrock Performer-Plus Camshaft Kit for Oldsmobile 400-425-455 V8 (2152)
000853470215294 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Universal
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 13.0 hrs — $1,625 at $125/hr. Pick Install at HRC and a 20% labor deposit ($325) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Edelbrock Performer-Plus Camshaft #2152 is designed for 400-425-455 Oldsmobile V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2152 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 445 Ft Lbs of Torque when paired with Performer Olds 455 intake manifold #2151 and stock cylinder heads. Will not fit Toronados or 1966 and earlier. Fits 1967-84 400-425-455, 39 Degree bank angle engine. Camshaft specifications: - Intake duration: 214 Degrees - Exhaust duration: 224 Degrees - Intake lift: .472" - Exhaust lift: .496" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 15"
| Part Type | Engine Camshaft and Lifter Kit |
|---|---|
| Lobe Separation | 112° |
| Grade Type | Performance |
| Cam Type | Cast |
| Exhaust Valve Lift | 0.496" |
| Exhaust Duration at .050 inch Lift | 224° |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Lifter Type | Hydraulic |
| Advertised Intake Duration | 288° |
| Lifter Materials | Hardened Steel |
| Advertised Exhaust Duration | 298° |
| Computer Controlled Compatible | No |
| Intake Valve Lift | 0.472" |
| Intake Duration .050 Inch Lift | 224° |
| Weight | 15.65 lb |
| UPC | 00085347021529 |
| Country of Origin | USA |
Verified fitment · 105 applications
- GMC Transmode 7.5L (1973–1974)
- Oldsmobile 442 6.6L (1967–1969)
- Oldsmobile 442 7.5L (1968–1971)
- Oldsmobile 98 7.0L (1967)
- Oldsmobile 98 7.5L (1968–1974)
- Oldsmobile Custom Cruiser 7.5L (1971–1974)
- Oldsmobile Cutlass 6.6L (1967–1968)
- Oldsmobile Cutlass 7.5L (1970–1974)
- Oldsmobile Cutlass Supreme 7.5L (1971–1974)
- Oldsmobile Delmont 88 7.0L (1967)
- Oldsmobile Delmont 88 7.5L (1968)
- Oldsmobile Delta 88 7.0L (1967)
- Oldsmobile Delta 88 7.5L (1968–1974)
- Oldsmobile F85 7.5L (1970–1972)
- Oldsmobile Vista Cruiser 6.6L (1968–1969)
- Oldsmobile Vista Cruiser 7.5L (1970–1974)
| Part No. | 2152 |
|---|---|
| Brand | Edelbrock |
| Part Type | Engine Camshaft and Lifter Kit |
| Weight | 15.65 lb |
| UPC | 00085347021529 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
