Edelbrock Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (2103)
000853470210314 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Universal
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 13.0 hrs — $1,625 at $125/hr. Pick Install at HRC and a 20% labor deposit ($325) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Edelbrock Performer-Plus Camshaft #2103 is designed for 400 Chevy V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2103 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 395 Ft Lbs of Torque when paired with Performer Intake manifold #2101 and stock cylinder heads. 50-State Legal E.O. #D-215-19 for 1957-86 small-block Chevrolet. Camshaft specifications: - Intake duration: 214 Degrees - Exhaust duration: 214 Degrees - Intake lift: .442" - Exhaust lift: .442" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 15"
| Part Type | Engine Camshaft and Lifter Kit |
|---|---|
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Advertised Exhaust Duration | 288° |
| Computer Controlled Compatible | No |
| Intake Duration .050 Inch Lift | 214° |
| Grade Type | Performance |
| Lifter Materials | Hardened Steel |
| Cam Type | Cast |
| Lifter Type | Hydraulic |
| Exhaust Valve Lift | 0.442" |
| Exhaust Duration at .050 inch Lift | 214° |
| 9040 | D-215-19 |
| Lobe Separation | 112° |
| Advertised Intake Duration | 288° |
| Intake Valve Lift | 0.442" |
| Weight | 13.8 lb |
| UPC | 00085347021031 |
| Country of Origin | USA |
Verified fitment · 269 applications
- Chevrolet Bel Air (1970–1974)
- Chevrolet Bel Air 6.6L (1970–1975)
- Chevrolet Biscayne (1970–1972)
- Chevrolet Biscayne 6.6L (1970–1972)
- Chevrolet Brookwood (1970–1972)
- Chevrolet Brookwood 6.6L (1970–1972)
- Chevrolet C10 6.6L (1976–1980)
- Chevrolet C20 6.6L (1976–1980)
- Chevrolet C20 Suburban 6.6L (1976–1980)
- Chevrolet C30 6.6L (1976–1978)
- Chevrolet Caprice (1970–1974)
- Chevrolet Caprice 6.6L (1970–1976)
- Chevrolet Chevelle (1970–1973)
- Chevrolet El Camino (1970–1974)
- Chevrolet El Camino 6.6L (1970–1976)
- Chevrolet Estate (1970)
- Chevrolet G10 6.6L (1976)
- Chevrolet G20 6.6L (1975–1980)
- Chevrolet G30 6.6L (1975–1980)
- Chevrolet Impala (1970–1974)
- Chevrolet Impala 6.6L (1970–1976)
- Chevrolet K10 6.6L (1975–1980)
- Chevrolet K10 Suburban 6.6L (1975–1979)
- Chevrolet K20 6.6L (1975–1980)
- Chevrolet K20 Suburban 6.6L (1975–1980)
- Chevrolet K30 6.6L (1977–1980)
- Chevrolet K5 Blazer 6.6L (1975–1979)
- Chevrolet Kingswood (1970–1972)
- Chevrolet Kingswood 6.6L (1970–1972)
- Chevrolet Monte Carlo (1970–1974)
- Chevrolet Monte Carlo 6.6L (1970–1976)
- Chevrolet Townsman (1970–1972)
- Chevrolet Townsman 6.6L (1970–1972)
- GMC C15 6.6L (1976–1978)
- GMC C1500 6.6L (1979–1980)
- GMC C25 6.6L (1976–1978)
- GMC C25 Suburban 6.6L (1978)
- GMC C2500 6.6L (1979)
- GMC C2500 Suburban 6.6L (1980)
- GMC C35 6.6L (1976–1978)
- GMC C3500 6.6L (1979)
- GMC G15 6.6L (1976)
- GMC G1500 6.6L (1979)
- GMC G25 6.6L (1975–1978)
- GMC G2500 6.6L (1979–1980)
- GMC G35 6.6L (1975–1978)
- GMC G3500 6.6L (1979–1980)
- GMC Jimmy 6.6L (1975–1979)
- GMC K15 6.6L (1975–1978)
- GMC K15 Suburban 6.6L (1975–1978)
- GMC K1500 6.6L (1979–1980)
- GMC K1500 Suburban 6.6L (1979–1980)
- GMC K25 6.6L (1975–1978)
- GMC K25 Suburban 6.6L (1975–1978)
- GMC K2500 6.6L (1979–1980)
- GMC K2500 Suburban 6.6L (1979–1980)
- GMC K35 6.6L (1977–1978)
- GMC K3500 6.6L (1979–1980)
- GMC Sprint (1971–1974)
- GMC Sprint 6.6L (1974–1976)
- Oldsmobile Custom Cruiser 6.6L (1975)
- Oldsmobile Delta 88 6.6L (1975)
- Pontiac Bonneville 6.6L (1972–1975)
- Pontiac Catalina 6.6L (1975)
- Pontiac Firebird 6.6L (1972)
- Pontiac Grand Am 6.6L (1975)
- Pontiac Grand LeMans 6.6L (1975)
- Pontiac Grand Prix 6.6L (1975–1976)
- Pontiac Grand Safari 6.6L (1972)
- Pontiac Grandville 6.6L (1972–1975)
- Pontiac Laurentian (1972)
- Pontiac Laurentian 6.6L (1972)
- Pontiac LeMans 6.6L (1975)
- Pontiac Parisienne (1972)
- Pontiac Parisienne 6.6L (1972)
| Part No. | 2103 |
|---|---|
| Brand | Edelbrock |
| Part Type | Engine Camshaft and Lifter Kit |
| Weight | 13.8 lb |
| UPC | 00085347021031 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
