Crate Engine #46890 Ford Coyote 302, Supercharged, 785 HP, 660 ft-lbs (46890)
000853474689044 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Coyote 5.0
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 32.0 hrs — $4,000 at $125/hr. Pick Install at HRC and a 20% labor deposit ($800) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Edelbrock supercharged 5.0L Ford Coyote crate engine part #46890 produced 785 hp and 660 ft-lbs. of torque (with 93 octane fuel) at the flywheel. The core of this engine is a brand new Ford lightweight aluminum block with forged and balanced crankshaft, forged Manley H-Beam connecting rods and Mahle forged aluminum pistons. Sitting on top is an Edelbrock supercharger with Eaton TVS R2650 rotors. Also included are the essential supercharger kit components, such as the 8 rib drive belt, electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb./hr. fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter. Includes all front end drive accessories: water pump, alternator, idlers, tensioners, belts and hardware. Pair with universal heat exchangers for a complete installation. Engine Specifications: Finish: Black powder coated
| Part Type | Engine Complete Assembly |
|---|---|
| Oil Filter Included | Yes |
| Carburetor Type | Not Included |
| Manifold Material | N/A |
| Grade Type | Performance |
| Construction Type | Assembled |
| Rotor Type | Eaton TVS 2650, Black Powder Coated |
| Pulley Belt Width | 8-Rib |
| Harmonic Balancer Included | Yes |
| Idler Pulley Included | Yes |
| RGL | WARNING: This product can expose you to Chromium, Lead, and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Throttle Body Included | Yes |
| Rear Main Seal Type | 1-Piece |
| Hardware Included | Yes |
| Crankshaft Material | Forged Steel |
| Oil Pan Included | Yes |
| Timing Cover Included | Yes |
| Plug Wire and Boot Included | Yes |
| Main Bearing Cap Bolt Quantity | 4-Bolt |
| Alternator Included | Yes |
| ECU Included | Yes |
| Induction Type | Supercharged |
| Flywheel Included | No |
| Rocker Arm Ratio | 2:1 |
| Camshaft Type | 243deg/254deg, .660/.651, 114 LSA |
| Cylinder Head Type | Ford Racing |
| Horsepower | 785 |
| Spark Plugs Included | Yes |
| Compression Ratio | 9.5:1 |
| Type | Ford Coyote |
| Calibration | Yes |
| Wire Harness Included | Yes |
| Air Cleaner Type | Not Included |
| Cylinder Head Material | Aluminum |
| Distributor Included | No |
| Torque | 660 |
| Valve Cover Included | No |
| Rocker Arm Type | Ford OEM |
| Universal Or Specific Fit | Specific Fit |
| Engine Block Material | Cast Iron |
| Quantity | Sold Individually |
| Intake Manifold Type | EFI |
| Valve Cover Material | N/A |
| Displacement | 302 cid |
| Piston Type | Forged Aluminum |
| Water Pump Included | Yes, Standard |
| Carburetor Choke Type | N/A |
| Valve Cover Type | N/A |
| Outside Pulley Diameter | 3.00" |
| Weight | 726 lb |
| UPC | 00085347468904 |
| Country of Origin | USA |
Verified fitment · 14 applications
- Ford F-150 5.0L (2011–2017)
- Ford Mustang 5.0L (2011–2017)
| Part No. | 46890 |
|---|---|
| Brand | Edelbrock |
| Part Type | Engine Complete Assembly |
| Weight | 726 lb |
| UPC | 00085347468904 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
