Pro-Flo 4 EFI Traditional 4150-Style Kit #35740 For Chevy LS Gen III/IV (35740)
000853473574064 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- LS/LT
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 14.0 hrs — $1,750 at $125/hr. Pick Install at HRC and a 20% labor deposit ($350) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
The Edelbrock Pro-Flo 4 Sequential Port EFI System #35740 for Chevrolet LS GEN III/IV engines is equipped with the latest in technology and features. The EFI system comes complete with a traditional 4150-Style satin finish Victor Jr. rectangle port intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We've added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU's self-learning capability to continually adjust the calibration to get the maximize performance of your engine. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals and performance. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
| Part Type | Fuel Injection System |
|---|---|
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Finish | Satin |
| Wiring Harness Included | Yes |
| Idle Air Control Motor Included | Yes |
| Fuel Injector Type | 35 lb/hr |
| Distributor Cap Included | Yes |
| Wire Harness Included | Yes |
| Bore Diameter | 1.75" |
| Throttle Body Type | 4 Barrel |
| System Type | Traditional 4150-Style Kit |
| Manifold Height | 7.40" |
| Gasket Or Seal Included | Yes |
| Flange Type | 4150 |
| Hardware Included | Yes |
| Quantity | Kit |
| Fuel Pressure Port | 1/8-27 NPT |
| Maximum Horsepower | 550 |
| Weight | 54 lb |
| UPC | 00085347357406 |
| Country of Origin | USA |
Verified fitment · 37 applications
- Chevrolet Camaro 6.2L (2010–2015)
- Chevrolet Cheyenne (2014–2016)
- Chevrolet Cheyenne 6.2L (2017–2018)
- Chevrolet Corvette 6.2L (2008–2013)
- Chevrolet SS 6.2L (2014–2017)
- Chevrolet Silverado 1500 6.2L (2014–2018)
- Chevrolet Tahoe 6.2L (2008)
| Part No. | 35740 |
|---|---|
| Brand | Edelbrock |
| Part Type | Fuel Injection System |
| Weight | 54 lb |
| UPC | 00085347357406 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
