Pro-Flo 4 EFI Traditional 4150-Style Kit #35680 For BB Ford 429-460 (35680)
000853473568054 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Universal
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 14.0 hrs — $1,750 at $125/hr. Pick Install at HRC and a 20% labor deposit ($350) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
The Edelbrock Pro-Flo 4 EFI Kit #35680 for Ford big-block 429-460 engines is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance Super Victor single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors, wire harnesses and ECU are included along with a full-color installation manual. The Super Victor EFI manifold is designed with a larger cross-sectional area in the plenum with longer runners for high-horsepower and/or large cubic-inch applications. This kit uses 42 Lb/Hr injectors and is rated for 675 horsepower at 58 PSI of fuel pressure. The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
| Part Type | Fuel Injection System |
|---|---|
| Wiring Harness Included | Yes |
| Idle Air Control Motor Included | Yes |
| Manifold Height | 4.25" |
| Distributor Cap Included | Yes |
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Fuel Pressure Port | 1/8-27 NPT |
| Finish | Satin |
| Wire Harness Included | Yes |
| Bore Diameter | 1.75" |
| Gasket Or Seal Included | Yes |
| Maximum Horsepower | 675 |
| Fuel Injector Type | 42 lb/hr |
| Flange Type | 4150 |
| Quantity | Kit |
| Throttle Body Type | 4 Barrel |
| System Type | Traditional 4150-Style Kit |
| Weight | 47 lb |
| UPC | 00085347356805 |
| Country of Origin | USA |
Verified fitment · 437 applications
- Ford B-600 7.0L (1988–1989)
- Ford B-700 7.0L (1980–1989)
- Ford C700 7.0L (1980–1986)
- Ford C800 7.0L (1980–1987)
- Ford Country Sedan 7.0L (1969–1973)
- Ford Country Sedan 7.5L (1972–1974)
- Ford Country Squire 7.0L (1969–1973)
- Ford Country Squire 7.5L (1972–1974)
- Ford Custom 500 7.0L (1969–1973)
- Ford Custom 500 7.5L (1972–1976)
- Ford Custom 7.0L (1969–1972)
- Ford Custom 7.5L (1972)
- Ford E-100 Econoline 7.5L (1978)
- Ford E-250 Econoline 7.5L (1975–1980)
- Ford E-250 Econoline Club Wagon 7.5L (1975–1991)
- Ford E-350 Econoline 7.5L (1975–1996)
- Ford E-350 Econoline Club Wagon 7.5L (1977–1996)
- Ford Econoline Super Duty 7.5L (1996)
- Ford Elite 7.5L (1975–1976)
- Ford F-100 7.5L (1973–1979)
- Ford F-150 7.5L (1975–1979)
- Ford F-250 7.5L (1973–1996)
- Ford F-250 HD 7.5L (1997)
- Ford F-350 7.5L (1973–1997)
- Ford F-450 Super Duty 7.5L (1997)
- Ford F-53 Motorhome Chassis 7.5L (1988–1997)
- Ford F-600 7.0L (1980–1994)
- Ford F-600 LPO 7.0L (1990–1994)
- Ford F-700 7.0L (1980–1998)
- Ford F-800 7.0L (1980–1998)
- Ford F-Super Duty 7.5L (1988–1997)
- Ford FT800 7.0L (1980–1990)
- Ford Fairlane 7.0L (1970)
- Ford Falcon 7.0L (1970)
- Ford Galaxie 500 7.0L (1969–1973)
- Ford Galaxie 500 7.5L (1972–1974)
- Ford Gran Torino 7.0L (1972–1973)
- Ford Gran Torino 7.5L (1973–1976)
- Ford L800 7.0L (1980–1985)
- Ford LN700 7.0L (1980–1985)
- Ford LN800 7.0L (1980–1985)
- Ford LNT800 7.0L (1981–1984)
- Ford LT800 7.0L (1981–1984)
- Ford LTD 7.0L (1969–1973)
- Ford LTD 7.5L (1972–1978)
- Ford Mustang 7.0L (1969–1971)
- Ford P-600 7.0L (1993–1994)
- Ford Ranch Wagon 7.0L (1969–1973)
- Ford Ranch Wagon 7.5L (1972–1974)
- Ford Ranchero 7.0L (1970–1973)
- Ford Ranchero 7.5L (1974–1977)
- Ford Thunderbird 7.0L (1968–1973)
- Ford Thunderbird 7.5L (1972–1976)
- Ford Torino 7.0L (1970–1973)
- Ford Torino 7.5L (1973–1976)
| Part No. | 35680 |
|---|---|
| Brand | Edelbrock |
| Part Type | Fuel Injection System |
| Weight | 47 lb |
| UPC | 00085347356805 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
