Edelbrock Twin-Force Stg 2-3 Upgrade Kit 17-22 Ford F150/Raptor 3.5L HO EcoBoost (158338)
000853478972784 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Universal — verify fitment for your application
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 20.0 hrs — $2,500 at $125/hr. Pick Install at HRC and a 20% labor deposit ($500) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Edelbrock Twin-Force Stage 2-3 Turbo System Upgrade Kit For 17-22 Ford F150/Raptor Truck 3.5L HO V6 EcoBoost #158338 will upgrade your Edelbrock Twin-Force Stage 2 Turbo System to a Stage 3 Turbo System. If you have a Stage 2 Turbo System, purchasing the Stage 2-3 Turbo System Upgrade Kit Part #158338 that will fully complete your system with the Stage 3 electronic fuel pump booster and matching calibration unlocking the max potential of your truck. Edelbrock's engineers collaborated with Garrett on the design of all new turbos for the 3.5L EcoBoost trucks. These new direct bolt-in turbos incorporate the latest in turbocharger technology, offering a 54% increase in airflow over the factory turbos. A 60mm billet compressor wheel produces great improvements in compressor efficiency and flow. The 50mm Inconel turbine wheel and larger .45 A/R stainless steel turbine housing result in a 52% increase in turbine flow. The 2.75 compressor inlets are 38% larger than the factory turbos complementing Edelbrock's high flow turbo inlet piping. When combined with Edelbrock's larger Intercooler, air inlet tubes and high flow air filter, these turbochargers offer huge increases in power potential for this application.
| Part Type | Turbocharger Kit |
|---|---|
| Electronic Fuel Pump Booster Included | Yes |
| Calibration Included | Yes |
| Driver & Passenger Turbos included | No |
| Turner Included | No |
| Turbo Inlet Piping Included | No |
| Exhaust Turbine Wheel Material | N/A |
| Fitment Type | Specific |
| Intercooler Included | No |
| RGL | WARNING: This product can expose you to Chromium and Zinc, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Turbo Compressor Wheel Diameter | N/A mm |
| Turbo Compressor Wheel Material | N/A |
| Exhaust Turbine Wheel Diameter | N/A mm |
| E.O. | D-215-127 |
| Quantity | 1 Kit |
| Maximum Horsepower | 500RW (With 93 Octane) |
| Air Filter Included | No |
| System Type | Stage 2-3 Upgade Kit |
| Weight | 5 lb |
| UPC | 00085347897278 |
| Country of Origin | USA |
Verified fitment · 4 applications
- Ford F-150 Raptor 3.5L (2017–2020)
| Part No. | 158338 |
|---|---|
| Brand | Edelbrock |
| Part Type | Turbocharger Kit |
| Weight | 5 lb |
| UPC | 00085347897278 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.