Edelbrock Stg 2 Supercharger Upgrade #15883 18-21 Ford Mustang 5.0L 4V W/ Tune (15883)
000853471588364 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Coyote 5.0
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 6.0 hrs — $750 at $125/hr. Pick Install at HRC and a 20% labor deposit ($150) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Owners of 2018-2021 Ford Mustangs who have installed an Edelbrock #15832/158320 Stage I Supercharger Kit can now step up to the next level of performance with the Stage II Supercharger System Upgrade Kit #15883. With this Stage II upgrade kit, your vehicle remains emissions-legal in all 50-states while taking full advantage of the improved Gen 3 DI/PI Coyote engine. The Edelbrock Stage II Supercharger Upgrade Kit features all of the vital components required to support the additional horsepower increase that makes this our highest rated horsepower system. Included are a 103mm Throttle Body to replace the Stage I 80mm, a high-flow air intake system, a 113mm Mass Airflow Sensor Kit with injection-molded housing, larger 50 lb/hr direct-port fuel injectors along with a Fuel Pump Voltage Regulator, and an 8-rib belt drive to minimize slippage and maintain consistent boost pressure under full throttle.
| Part Type | Supercharger Upgrade Kit |
|---|---|
| Quantity | Kit |
| Rotor Type | Eaton TVS 2650 |
| Pulley Belt Width | 8-Rib |
| Maximum Torque | 533RW |
| Outside Pulley Diameter | 3.5" |
| Pulley Color | Black anodized |
| Air Filter Included | Yes |
| Harmonic Balancer Diameter | 7.75" |
| Gasket Or Seal Included | Yes |
| Maximum Boost Pressure | 13 |
| Mounting Bracket Included | Yes |
| Universal Or Specific Fit | Specific |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Finish | Black |
| Pulley Material | Aluminum |
| Maximum Horsepower | 686RW |
| Mounting Hardware Included | Yes |
| System Type | Stage 2 - Street/Strip System |
| Pulley Groove Quantity | 8-Rib |
| Fuel Injector Type | 50 |
| Calibration | Yes |
| Tensioner Included | Yes |
| 9040 | D-215-122 |
| Weight | 50 lb |
| UPC | 00085347158836 |
| Country of Origin | USA |
Verified fitment · 6 applications
- Ford Mustang GT (2018–2020)
- Ford Mustang GT Premium (2018–2020)
| Part No. | 15883 |
|---|---|
| Brand | Edelbrock |
| Part Type | Supercharger Upgrade Kit |
| Weight | 50 lb |
| UPC | 00085347158836 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.