Edelbrock Stg 1 Supercharger #15610 11-13 Silverado/Sierra 2500 HD 6.0L W/O Tune (15610)
000853471561084 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Universal — verify fitment for your application
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 14.0 hrs — $1,750 at $125/hr. Pick Install at HRC and a 20% labor deposit ($350) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
The Edelbrock supercharger Stage 1 Street System part #15610 for 2011-13 Silverado and Sierra HD 2500 increases the performance of your 6.0L Gen IV engine to 399 horsepower and 395 ft-lbs of torque at the rear wheels when used with Edelbrock tune (kit supplied without a programmer). The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. HANDHELD PROGRAMMER NOT INCLUDED. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.
| Part Type | Supercharger Kit |
|---|---|
| System Type | Stage 1 - Street System |
| Oil Capacity | 150 mL |
| Quantity | Kit |
| Calibration | No |
| Internal Step Up | Yes |
| Outside Pulley Diameter | 3.75" |
| Air Filter Included | Yes |
| 9040 | D-215-110 |
| Fuel Injector Type | 42 |
| Hose Included | Yes |
| Center Housing Cooling Type | Intercooler |
| Universal Or Specific Fit | Specific |
| Mounting Hardware Included | Yes |
| Housing Material | Cast Aluminum |
| Pulley Belt Width | 6-Rib |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Vehicle Model | Sierra HD 2500 |
| Mounting Bracket Included | Yes |
| Finish | Black Powder Coated |
| Harmonic Balancer Diameter | 7.5" |
| Gasket Or Seal Included | Yes |
| Rotor Type | Eaton TVS 2300 |
| Weight | 198 lb |
| UPC | 00085347156108 |
| Country of Origin | USA |
Verified fitment · 6 applications
- Chevrolet Silverado 2500 HD 6.0L (2011–2013)
- GMC Sierra 2500 HD 6.0L (2011–2013)
| Part No. | 15610 |
|---|---|
| Brand | Edelbrock |
| Part Type | Supercharger Kit |
| Weight | 198 lb |
| UPC | 00085347156108 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
