Edelbrock Stg 1 Supercharger #155950 16-24 Camaro SS LT1 6.2L All Trans W/O Tune (155950)
000853479995454 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- LS/LT
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 14.0 hrs — $1,750 at $125/hr. Pick Install at HRC and a 20% labor deposit ($350) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
The Edelbrock Supercharger System W/O TUNER #155950 is a 50-state emissions-legal power adder designed for use with the 2016-24 Chevrolet Camaro SS 6.2L LT1. This Stage 1 system features a manifold that houses Eaton's biggest R2650 TVS rotor assembly with 170-degree high-twist lobes, bigger bearings and beefier timing gears for unparalleled efficiency and reliability. This is a true bolt-on supercharger kit that requires no additional modifications to the stock 6.2L engine and fits under the Camaro hood with no cutting or modification. With a dyno-tested output of 609 horsepower and 587 ft-lbs of torque, the increase in power comes with little to no loss in fuel economy thanks to the supercharger's integrated bypass valve that mitigates parasitic power loss during normal driving. For those who want more power, the R2650 supercharger can support more than 1,000 horsepower at the flywheel with the right combination of parts. The Edelbrock supercharger for the Camaro has a self-contained lubrication system with a 100,000-mile service interval, a high-capacity Dual-Pass 3-Core (DP3C) integrated intercooler and comes finished in a durable black powder-coating. Each kit includes a complete set of preformed hoses, hardware and a full-color manual that provides step-by-step instructions for ease of installation (Note: Kit #155950 does not include the handheld tuner). This system is designed and manufactured in the USA and is covered by Edelbrock's free 3-year/36,000-mile powertrain warranty.
| Part Type | Supercharger Kit |
|---|---|
| Air Filter Included | Yes |
| Tensioner Included | Yes |
| Oil Capacity | 150 mL |
| 9040 | D-215-125 |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Mounting Hardware Included | Yes |
| Finish | Black Powder Coated |
| Housing Material | Cast Aluminum |
| Calibration | No |
| Internal Step Up | Yes |
| Transmission Type | Automatic and Manual |
| Quantity | Kit |
| System Type | Stage 1 - Street System |
| Rotor Type | Eaton TVS 2650 |
| Gasket Or Seal Included | Yes |
| Hose Included | Yes |
| Universal Or Specific Fit | Specific |
| Outside Pulley Diameter | 4" |
| Mounting Bracket Included | Yes |
| Vehicle Model | Camaro |
| Pulley Belt Width | 8-Rib |
| Center Housing Cooling Type | Intercooler |
| Weight | 164 lb |
| UPC | 00085347999545 |
| Country of Origin | USA |
Verified fitment · 3 applications
- Chevrolet Camaro SS (2016–2018)
| Part No. | 155950 |
|---|---|
| Brand | Edelbrock |
| Part Type | Supercharger Kit |
| Weight | 164 lb |
| UPC | 00085347999545 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.