Edelbrock Stage 2 Supercharger Kit #15940 For 2005-07 Corvette LS2 W/O Tune (15940)
000853471594064 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- LS/LT
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 14.0 hrs — $1,750 at $125/hr. Pick Install at HRC and a 20% labor deposit ($350) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
The Edelbrock supercharger stage 2 street/strip system part #15940 for 2005-07 Chevy Corvette increases the performance of your LS2 engine to 599 horsepower and 547 ft-lbs of torque at the crank when used with Edelbrock tune (kit supplied without a programmer). The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. HANDHELD PROGRAMMER NOT INCLUDED. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock program.
| Part Type | Supercharger Kit |
|---|---|
| Vehicle Model | Corvette |
| Housing Material | Cast Aluminum |
| Rotor Type | Eaton TVS 2300 |
| Internal Step Up | Yes |
| Quantity | Kit |
| Universal Or Specific Fit | Specific |
| Air Filter Included | Yes |
| 9040 | D-215-89 |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Finish | Black Powder Coated |
| Tensioner Included | Yes |
| Oil Capacity | 150 mL |
| Harmonic Balancer Diameter | 7.5" |
| Calibration | No |
| Mounting Hardware Included | Yes |
| Center Housing Cooling Type | Intercooler |
| Pulley Belt Width | 6-Rib |
| Fuel Injector Type | 52 |
| Mounting Bracket Included | Yes |
| Gasket Or Seal Included | Yes |
| Hose Included | Yes |
| Outside Pulley Diameter | 3.5" |
| System Type | Stage 2 - Street/Strip System |
| Weight | 186 lb |
| UPC | 00085347159406 |
| Country of Origin | USA |
Verified fitment · 3 applications
- Chevrolet Corvette (2005–2007)
| Part No. | 15940 |
|---|---|
| Brand | Edelbrock |
| Part Type | Supercharger Kit |
| Weight | 186 lb |
| UPC | 00085347159406 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
