Edelbrock Stage 2 Supercharger #15711 For 14-19 Corvette Stingray LT1 W/ Tune (15711)
000853471571124 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- LS/LT
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 14.0 hrs — $1,750 at $125/hr. Pick Install at HRC and a 20% labor deposit ($350) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
The Edelbrock supercharger stage 2 street/strip system part #15711 for 2014-19 Chevy Corvette Stingray LT1 increases the performance of your LT1 engine to 537 horsepower and 527 ft-lbs of torque to the rear wheels. The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. The Edelbrock #15711 system is 50-state emissions legal. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust.
| Part Type | Supercharger Kit |
|---|---|
| Vehicle Model | Corvette |
| Hose Included | Yes |
| Center Housing Cooling Type | Intercooler |
| Universal Or Specific Fit | Specific |
| Pulley Belt Width | 10-Rib |
| Maximum Horsepower | 536RW (With 91 Octane); 551RW (With 93 Octane) |
| Gasket Or Seal Included | Yes |
| Maximum Pressure Reading | 7.5 |
| Rotor Type | Eaton TVS 2300 |
| Housing Material | Cast Aluminum |
| Quantity | Kit |
| Internal Step Up | Yes |
| 9040 | D-215-103 |
| Mounting Bracket Included | Yes |
| Oil Capacity | 150 mL |
| Air Filter Included | Yes |
| System Type | Stage 2 - Street/Strip System |
| Calibration | Yes |
| Mounting Hardware Included | Yes |
| Harmonic Balancer Diameter | Stock |
| Maximum Boost Pressure | 7.5 |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Finish | Black Powder Coated |
| Maximum Torque | 527RW (With 91 Octane); 534RW (With 93 Octane) |
| Outside Pulley Diameter | 3.25" |
| Tensioner Included | Yes |
| Weight | 164 lb |
| UPC | 00085347157112 |
| Country of Origin | USA |
Verified fitment · 3 applications
- Chevrolet Corvette Stingray (2014–2016)
| Part No. | 15711 |
|---|---|
| Brand | Edelbrock |
| Part Type | Supercharger Kit |
| Weight | 164 lb |
| UPC | 00085347157112 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
