Edelbrock Stage 1 Supercharger Kit #15832 For 2018-21 Ford Mustang 5.0L W/ Tune (15832)
000853471583244 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Coyote 5.0
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 14.0 hrs — $1,750 at $125/hr. Pick Install at HRC and a 20% labor deposit ($350) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Are you ready to add serious horsepower under the hood of your 2018-21 Ford Mustang GT? The Edelbrock Supercharger Kit #15832 is a 50-state emissions-legal system that is dyno-proven to produce 623 horsepower and 510 ft-lbs of torque to the rear wheels with no other modifications required! That means no cutting to stock body or hood so your car retains the stock hood and cowl. At the heart of this system is Eaton's biggest R2650 TVS rotor assembly housed in a new manifold with an integrated high-capacity DP3C (dual-pass, three-core) air-to-water intercooler for lower inlet air temperatures and increased power potential. The 170-degree high-twist lobes, bigger bearings and beefier timing gears ensure maximum reliability with smooth acceleration throughout the powerband. The Edelbrock Supercharger for the 5.0L V8 fits under the stock hood with absolutely no cutting or modifications required. And if you're concerned about the effect on MPG, the increase in power comes with little to no loss in fuel economy thanks to the supercharger's integrated bypass valve that mitigates parasitic power loss during normal driving. Our new kit is a true bolt-on that requires no additional modifications to the stock engine. For those who want more power, we've got an Edelbrock Stage 2 Upgrade Kit that can be added to transform your Mustang into a track-ready beast! This Edelbrock Supercharger has a self-contained lubrication system with a 100,000-mile service interval and comes finished in a durable black powder-coating that blends nicely into the engine compartment. Each kit includes a complete set of preformed hoses, hardware and a full-color manual that provides clear step-by-step instructions for ease of installation. This system is designed and manufactured in the USA and is covered by our industry-leading 3-year/36,000-mile warranty.
| Part Type | Supercharger Kit |
|---|---|
| Harmonic Balancer Diameter | 6.67" |
| Calibration | Yes |
| 9040 | D-215-122 |
| Air Filter Included | Yes |
| Maximum Horsepower | 623RW |
| Housing Material | Cast Aluminum |
| Quantity | Kit |
| Internal Step Up | Yes |
| Maximum Pressure Reading | 13 |
| Rotor Type | Eaton TVS 2650 |
| Oil Capacity | 150 mL |
| Gasket Or Seal Included | Yes |
| Hose Included | Yes |
| Center Housing Cooling Type | Intercooler |
| Universal Or Specific Fit | Specific |
| Maximum Boost Pressure | 13 |
| Mounting Bracket Included | Yes |
| Mounting Hardware Included | Yes |
| Pulley Belt Width | 6-Rib |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Finish | Black Powder Coated |
| Outside Pulley Diameter | 3.25" |
| System Type | Stage 1 - Street System |
| Tensioner Included | Yes |
| Vehicle Model | Mustang |
| Maximum Torque | 510RW |
| Spark Plugs Included | Yes |
| Weight | 110 lb |
| UPC | 00085347158324 |
| Country of Origin | USA |
Verified fitment · 2 applications
- Ford Mustang GT (2020)
- Ford Mustang GT Premium (2020)
| Part No. | 15832 |
|---|---|
| Brand | Edelbrock |
| Part Type | Supercharger Kit |
| Weight | 110 lb |
| UPC | 00085347158324 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.