Edelbrock Stage 1 Supercharger #158380 For 2015-17 Ford Mustang 5.0L W/O Tune (158380)
000853478910544 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Coyote 5.0
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 14.0 hrs — $1,750 at $125/hr. Pick Install at HRC and a 20% labor deposit ($350) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Edelbrock's performance-proven modular-inlet supercharger is now available for owners of 2015-2017 Ford Mustangs with the 5.0L engine. The new Edelbrock Supercharger System W/O Tuner #158380 is a bolt-on kit that produces an impressive 690 horsepower with 588 ft-lbs of torque. At the heart of this system is Eaton's biggest R2650 TVS rotor assembly housed in a new manifold with an integrated high-capacity DP3C (dual-pass, three-core) air-to-water intercooler for lower inlet air temperatures and increased power potential. The 170-degree high-twist lobes, bigger bearings and beefier timing gears ensure maximum reliability with smooth acceleration throughout the powerband. The Edelbrock supercharger for the 5.0L V8 fits under the stock hood with absolutely no cutting or modifications required. And if you're concerned about the effect on MPG, the increase in power comes with little to no loss in fuel economy thanks to the supercharger's integrated bypass valve that mitigates parasitic power loss during normal driving. This new kit is a true bolt-on that requires no additional modifications to the stock Coyote engine. For those who want more power, an Edelbrock Stage 2 Upgrade Kit #15884 can be added to transform your Mustang into a track-ready beast! The Edelbrock supercharger for the 2015-17 Mustang has a self-contained lubrication system with a 100,000-mile service interval and comes finished in a durable black powder-coating that blends nicely into the engine compartment. Each kit includes a complete set of preformed hoses, hardware and a full-color manual that provides clear step-by-step instructions for ease of installation (Note: Kit #158380 does not include the handheld tuner). This system is designed and manufactured in the USA and is covered by Edelbrock's industry-leading 3-year/36,000-mile warranty.
| Part Type | Supercharger Kit |
|---|---|
| Quantity | Kit |
| Universal Or Specific Fit | Specific |
| Mounting Bracket Included | Yes |
| Fuel Injector Type | 50 |
| Oil Capacity | 150 mL |
| Vehicle Model | Mustang |
| Rotor Type | Eaton TVS 2650 |
| Air Filter Included | Yes |
| Harmonic Balancer Diameter | 6.67" |
| Internal Step Up | Yes |
| Mounting Hardware Included | Yes |
| Center Housing Cooling Type | Intercooler |
| Outside Pulley Diameter | 3.25" |
| System Type | Stage 1 - Street System |
| Tensioner Included | Yes |
| 9040 | D-215-107 |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Finish | Black Powder Coated |
| Spark Plugs Included | Yes |
| Calibration | Yes |
| Gasket Or Seal Included | Yes |
| Hose Included | Yes |
| Housing Material | Cast Aluminum |
| Pulley Belt Width | 6-Rib |
| Weight | 178 lb |
| UPC | 00085347891054 |
| Country of Origin | USA |
Verified fitment · 3 applications
- Ford F-150 5.0L (2015–2017)
| Part No. | 158380 |
|---|---|
| Brand | Edelbrock |
| Part Type | Supercharger Kit |
| Weight | 178 lb |
| UPC | 00085347891054 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.