Edelbrock Rollin' Thunder Camshaft Kit for 1969-93 Small-Block Ford 351W V8 (22815)
000853472281574 interest-free payments or as low as $—/mo with Affirm. See if you qualify
Compatibility
- Platform
- Universal
- Vehicle-specific fitment
- Review application details below
- Need help?
- Confirm fitment with us before ordering — (714) 202-7886
We list the engine platform a part is built for. That is not year-and-trim application data, so it does not confirm a fit on your specific vehicle.
- Est. install labor: 13.0 hrs — $1,625 at $125/hr. Pick Install at HRC and a 20% labor deposit ($325) is due at checkout; the balance is due at completion.
- An estimate for a stock vehicle, not a quote — we confirm it in writing when you book, before any labor is authorized. Seized hardware, prior modifications, diagnosis and machine work are quoted separately; tuning is arranged through our tuning partner. Questions: (714) 202-7886.
- Warranty & track disclaimer — read before you race it.
- Shipping & returns — rates and RMA terms.
- Installed in-house in Huntington Beach, CA — labor & service policy.
- Affirm and PayPal available at checkout.
More ways to pay at checkout
Edelbrock part #22815 Rollin' Thunder camshaft kit is designed for 1969-93 small-block Ford 351W V-8 applications. This complete cam kits include an Edelbrock Rollin' Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rollin' Thunder camshaft kit is ground specifically for use with the corresponding Performer or Performer RPM manifold and cylinder heads. However, Rollin' Thunder camshaft package may also be used with other components designed to operate in a similar RPM range. Camshaft Specifications: - Duration @ .050 Intake: 235 degrees - Duration @ .050 Exhaust: 238 degrees - Lift @ Valve Intake: .573" - Lift @ Valve Exhaust: .582" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 10"
| Part Type | Engine Camshaft Kit |
|---|---|
| Valve Springs Required | Yes |
| Lifter Type | Roller |
| Grade Type | Performance |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Length | 20.4375" |
| Intake Valve Lift with Factory Rocker Arm Ratio | 0.462" |
| Camshaft Material | Iron |
| Assembly Lubricant Included | Yes |
| Weight | 17 lb |
| UPC | 00085347228157 |
| Country of Origin | USA |
Verified fitment · 472 applications
- Ford Bronco 5.8L (1978–1993)
- Ford Country Sedan (1969–1974)
- Ford Country Squire (1969–1974)
- Ford Custom (1969–1972)
- Ford Custom 500 (1969–1974)
- Ford Custom 500 5.8L (1975–1977)
- Ford E-100 Econoline 5.8L (1975–1983)
- Ford E-100 Econoline Club Wagon 5.8L (1975–1983)
- Ford E-150 Econoline 5.8L (1975–1993)
- Ford E-150 Econoline Club Wagon 5.8L (1975–1993)
- Ford E-250 Econoline 5.8L (1975–1993)
- Ford E-250 Econoline Club Wagon 5.8L (1975–1991)
- Ford E-350 Econoline 5.8L (1975–1993)
- Ford E-350 Econoline Club Wagon 5.8L (1977–1993)
- Ford Elite 5.8L (1975–1976)
- Ford F-100 5.8L (1977–1979)
- Ford F-150 5.8L (1977–1993)
- Ford F-250 5.8L (1977–1993)
- Ford F-350 5.8L (1977–1993)
- Ford Fairlane (1969–1970)
- Ford Falcon (1969–1970)
- Ford Galaxie 500 (1969–1974)
- Ford Gran Torino (1972–1974)
- Ford Gran Torino 5.8L (1975–1976)
- Ford Granada 5.8L (1975–1977)
- Ford LTD (1969–1974)
- Ford LTD 5.8L (1975–1984)
- Ford LTD Crown Victoria 5.8L (1987–1991)
- Ford LTD II 5.8L (1977–1979)
- Ford Mustang (1969–1973)
- Ford Ranch Wagon (1969–1974)
- Ford Ranchero (1969–1974)
- Ford Ranchero 5.8L (1975–1979)
- Ford Thunderbird 5.8L (1977–1979)
- Ford Torino (1969–1974)
- Ford Torino 5.8L (1975–1976)
- Lincoln Continental 5.8L (1980)
- Lincoln Mark VI 5.8L (1980)
- Lincoln Versailles 5.8L (1977)
- Mercury Colony Park (1969–1974)
- Mercury Comet (1969)
- Mercury Cougar (1969–1974)
- Mercury Cougar 5.8L (1975–1979)
- Mercury Cyclone (1969–1971)
- Mercury Grand Marquis 5.8L (1978–1981)
- Mercury Marquis (1971–1973)
- Mercury Marquis 5.8L (1978–1981)
- Mercury Monarch 5.8L (1975–1977)
- Mercury Montego (1969–1974)
- Mercury Montego 5.8L (1975–1976)
- Mercury Monterey (1970–1974)
| Part No. | 22815 |
|---|---|
| Brand | Edelbrock |
| Part Type | Engine Camshaft Kit |
| Weight | 17 lb |
| UPC | 00085347228157 |
| Country of Origin | USA |
Platform-level fitment (Ford + GM, Phase 1). We publish the engine platform a part is built for — not year-and-trim application data — so nothing here confirms a fit on a specific vehicle. Confirm fitment with us before ordering: (714) 202-7886.
Commonly Needed With This
Parts builders usually buy alongside this one — gaskets, seals and hardware for the install. These are suggestions, not a verified fit: call (714) 202-7886 to confirm before ordering.
